G80-Chain Sling 3 Leg

G80-Chain Sling 3 Leg

3 Leg Chain Slings

8mm   WLL 3500kg @ 60 Degrees
10mm WLL 5500kg @ 60 Degrees
Complies to AS 3775.2014

Do not exceed rating capacity! To be used for industrial lifting only!
  • Keep a register of all slings in use
  • Never lift with a twisted chain
  • Chain slings should be shortened with a shortening hook, never by knotting
  • Protect the chain against sharp edges by sufficient padding
  • Never point load a hook - the load should always seat correctly in the bowl of the hook
  • Always use the correct size sling for the load, allowing for the included angle and the possibility of unequal loading
  • The master link should always be able to move freely on the crane hook
  • Avoid shock loading at all times
  • Avoid severe sling angles, use protection over sharp or rough edges


  • Chains should be inspected prior to use
  • Periodic use through examination must be carried out at least every 12 months or more frequently according to statutory regulations, type and frequency of use
  • Chains with bent links or with cracks or gouges in the link should be replaced, as should deformed components such as bent master links, opened up hooks and any fitting showing signs of damage




  • Always know the weight of the load you are going to lift
  • Select the correct slings for the lift
  • Avoid severe sling angles, use protection over sharp or rough edges
  • Make sure area and destination for load are clear before lifting
  • Always use dunnage so that slings are removed without damage
  • report any damage
  • Store slings in clean, dry areas correctly


Note: When chain is choked it is de-rated 20%

3 Leg Chain Slings
larger imageMove mouse over the image to magnify
Chain Size
Bottom Hook
Chain Length

You might also be interested in ...

1 Leg Chain Slings

1 Leg Chain Slings

G80-Chain Sling 1 Leg
2 Leg Chain Slings

2 Leg Chain Slings

G80-Chain Sling 2 Leg
4 Leg Lifting Slings

4 Leg Lifting Slings

G80-Chain Sling 4 Leg